Summer Starts Here - Save up to 70%
Curt T-Connector Vehicle Wiring Harness Installation - 2023 Mazda CX-30- Video
Hey guys, it's Jake here with etrailer. Today we're gonna be taking a look at and I'm gonna show you how to install the CURT four-pole wiring harness on your 2023 Mazda CX30. In order to use your wiring for this kit, all you have to do is open up the rear hatch, lift up your storage panel, pull your wiring out, and run it down to your trailer. And when you close your rear hatch, you just want to be sure to keep it far enough away from this latch so that it doesn't make contact with it. The weather seal here will protect the wiring and won't cause any damage, but when you get ready to hook up to a trailer, then your wiring's right here, you can connect to the trailer and it's gonna make you safe and legal when traveling down the road. Your four-pole wiring harness is gonna be your most common out on the road. more
1/17/2024 11:03:24 AM
Tekonsha T-One Vehicle Wiring Harness Installation - 2022 Mazda CX-30- Video
Hello neighbors, it's Brad here at Etrailer and today we're taking a look and installing Tekonsha T1 Trailer wiring harness on a 2022 Mazda CX-30. If you plan on towing a trailer or if you have accessories with lights on them, having a four pole wiring is going to allow you to have your light signals, including your running lights, your brake lights and turn signals transfer to the trailer or accessories letting the people behind you know what you're doing and it's gonna keep you safe and legal. Now this is a pretty easy way to get wiring in because it snaps into factory connections of your taillights and just kind of jumpers in. Now with that, you are gonna need to run a power wire up to the battery and that's kind of where it gets a little bit tricky of just going underneath the car to run it. But overall, the installation is fairly easy and the great part about this is even though you're plugging into your factory wiring, it's module protected, so if you ever have a back feed from your trailer, it's not gonna fry any of the lights on your OEM harness. So that's really nice, you get a little piece of mind there and there's also a fuse to keep it protected as well. more
11/23/2022 9:40:47 AM
Filter Videos
Filter Videos
